{"id":334,"count":31,"description":"<p>A <strong>48 V inverter\/charger<\/strong> It is the heart of an off-grid installation or a self-consumption system with residential-sized batteries: it converts the 48 V from the battery bank into 230 V, charges the battery from the mains or a generator and, in the Victron models, manages the automatic switchover between the mains and the battery in less than 20 ms. For power ratings of 3 kW and above, 48 V is the correct voltage: the current is four times lower than at 12 V, the cables are thinner, and the entire range of residential lithium-ion batteries (Pylontech, Pytes, ZYC, Victron) operates at this voltage.<\/p>\n<h2>Victron, MultiPlus, MultiPlus-II and Quattro 48 V range<\/h2>\n<ul>\n<li><strong>MultiPlus-II 48\/3000, 48\/5000, 48\/8000, 48\/10000 and 48\/15000:<\/strong> The standard for residential use. An AC input, mains-switched output, ESS mode for self-consumption, PowerAssist, and the option for parallel and three-phase operation with up to 6 units per phase.<\/li>\n<li><strong>Quattro 48\/5000, 48\/8000, 48\/10000 and 48\/15000:<\/strong> two AC inputs (mains and generator) with automatic switching; for off-grid installations with a generator set or with two power sources.<\/li>\n<li><strong>EasySolar-II GX 48\/3000 and 48\/5000:<\/strong> MultiPlus-II, MPPT controller and Cerbo GX integrated into a single enclosure. The quickest way to set up a complete off-grid system.<\/li>\n<li><strong>MultiPlus-II GX:<\/strong> with the built-in GX device for VRM, requiring no additional equipment.<\/li>\n<\/ul>\n<h2>How to choose the power rating<\/h2>\n<p>The continuous power (VA) must cover the total simultaneous loads, with a margin to allow for motor starts (pumps, compressors, air conditioning); the peak power of a MultiPlus-II is double its rated power for a few seconds. As a guide: 3,000 VA for a holiday home, 5,000 VA for a single-phase main residence, 8,000\u201310,000 VA or three-phase for large homes, heat pump systems and electric cars. The battery must be able to supply the current required by the inverter: a 48\/5000 requires around 100 A, that is to say, <strong>at least two modules<\/strong> Pylontech US5000, Pytes or ZYC SIMPO 5000.<\/p>\n<h2>What else do you need?<\/h2>\n<p>DC fuse and isolator sized in accordance with the manual (125 A at 48\/3000, 200 A at 48\/5000), battery cable from 35 to 70 mm\u00b2 in short lengths (<a href=\"https:\/\/fvcomponentes.com\/en\/cable-section-calculator\/\">cross-section calculator<\/a>), a regulator <a href=\"https:\/\/fvcomponentes.com\/en\/product-category\/solar-charging-regulators\/mppt-regulators\/\">SmartSolar MPPT<\/a> For the panels, a Cerbo GX if the battery is a lithium battery with CAN communication and AC input and output protection. All equipment can be supplied <strong>pre-configured<\/strong> for your battery.<\/p>\n<h2>Related guides<\/h2>\n<p><a href=\"https:\/\/fvcomponentes.com\/en\/step-by-step-guide-to-configuring-victron-ess\/\">Step-by-step guide to configuring Victron ESS<\/a><a href=\"https:\/\/fvcomponentes.com\/en\/how-to-set-up-your-victron-multiplus-ii-48-5000-pylontech-us5000\/\">MultiPlus-II 48\/5000 with Pylontech US5000<\/a><a href=\"https:\/\/fvcomponentes.com\/en\/errors-on-the-victron-multiplus-quattro-bus\/\">VE.Bus errors<\/a><a href=\"https:\/\/fvcomponentes.com\/en\/automatic-start-up-for-victron-cerbo-gx-generator\/\">Automatic generator start-up<\/a><a href=\"https:\/\/fvcomponentes.com\/en\/ac-coupling-fronius-victron-multiplus-ii-add-a-battery\/\">Adding a battery to a Fronius with MultiPlus-II<\/a><br \/>\nWe are authorised Victron Energy installers and provide free technical support for the equipment we sell. Prices include VAT, and delivery costs are calculated in the shopping basket; professionals can access a special rate via the <a href=\"https:\/\/fvcomponentes.com\/en\/professional-register\/\">professional register<\/a>.<\/p>","link":"https:\/\/fvcomponentes.com\/en\/categoria-producto\/inversores\/inversores-cargadores-48v\/","name":"Inverter Chargers 48V to 220V","slug":"inverter-chargers-48v","taxonomy":"product_cat","parent":333,"meta":[],"menu_order":58,"_links":{"self":[{"href":"https:\/\/fvcomponentes.com\/en\/wp-json\/wp\/v2\/product_cat\/334","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/fvcomponentes.com\/en\/wp-json\/wp\/v2\/product_cat"}],"about":[{"href":"https:\/\/fvcomponentes.com\/en\/wp-json\/wp\/v2\/taxonomies\/product_cat"}],"up":[{"embeddable":true,"href":"https:\/\/fvcomponentes.com\/en\/wp-json\/wp\/v2\/product_cat\/333"}],"wp:post_type":[{"href":"https:\/\/fvcomponentes.com\/en\/wp-json\/wp\/v2\/product?product_cat=334"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}