The Maxge Alpha+ 2P, 20A circuit breaker is a circuit breaker designed to protect single-phase circuits easily and effectively against overloads and short circuits, offering a safe, reliable and easy to integrate solution in all types of electrical panels.<\/p>\n
Thanks to its two-pole configuration (2P), its rated current of 20 A, tripping curve C and breaking capacity of 6 kA, it is a circuit breaker widely used in domestic, commercial and tertiary installations, ideal for lines with medium-high consumption, where stable and continuous protection is required.<\/p>\n
This circuit breaker combines thermal protection and magnetic protection in a single device, allowing the power supply to be cut off when a current anomaly is detected, preventing damage to wiring, connected equipment and reducing the risk of electrical faults or accidents.<\/p>\n
Being a 2-pole MCB (2P)<\/strong>, The phase and neutral are protected at the same time. This configuration is particularly suitable for sensitive single-phase circuits, control and command lines, auxiliary circuits, automatisms, spot or technical lighting, small electronic equipment, and installations where the neutral needs to be cut off together with the phase.<\/p>\n With a 20 ampere rated current<\/strong>, This circuit breaker is designed for circuits that support loads higher than the usual 16 A, such as dedicated lines or specific sockets.<\/p>\n It is very common to see it protecting heavily used sockets, lines dedicated to certain household appliances, small air-conditioning equipment, and circuits with several receivers operating simultaneously.<\/p>\n Provided that the cables are correctly dimensioned, this circuit breaker guarantees safe, stable and continuous operation of the circuit.<\/p>\n The Maxge Alpha+ 2P, 20A circuit-breaker incorporates a firing curve C<\/strong>. It is designed to tolerate moderate current peaks without causing untimely tripping.<\/p>\n The C-curve provides an optimum balance between sensitivity and stability, maintaining effective protection against dangerous overcurrents without affecting the normal operation of the installation.<\/p>\n This reduces nuisance shots. It is therefore suitable for circuits with general and mixed loads, small to medium-sized motors, starters, transformers, ventilation, pumps, air conditioning, electronic equipment and power supplies, lighting and three-phase sockets, and equipment that may have start-up peaks (without being extreme).<\/p>\n Your 6 kA breaking capacity<\/strong> means that it can safely interrupt major short circuits of up to 6,000 amperes without damage or loss of properties.<\/p>\n This is more than sufficient for homes, commercial premises, secondary switchboards and circuits far from the transformer.<\/p>\n It provides a good level of safety and protection for most common low voltage installations.<\/p>\n The Maxge Alpha+ 2P, 20A is designed for DIN rail mounting<\/strong>, This facilitates quick and tidy installation on any standard frame.<\/p>\n Your terminals<\/strong> are prepared to accept cables with a cross-section suitable for this current rating (16mm\u00b2 in flexible cable and 25mm\u00b2 in rigid cable<\/strong>). This guarantees firm and secure connections, without overheating or false contacts.<\/p>\n In addition, it has a compact 36 mm wide design<\/strong> (18 mm per pole), and it features window for circuit marker<\/strong> y a visual status signalling (on\/off)<\/strong>, The circuit it protects can be easily identified. This circuit breaker protects the circuit in two ways:<\/p>\n It is an ideal solution for switchboards in homes, small shops and offices, high-demand socket circuits, and specific protection of single-phase lines.<\/p>\n The advantages of this circuit breaker are as follows:<\/p>\n
\nThis provides total isolation of the circuit when the circuit breaker is manually tripped or disconnected, increasing safety during maintenance work and reducing electrical hazards.<\/p>\nMore demanding loads<\/h3>\n
Balance between protection and stability<\/h3>\n
\nIn addition, the installation is more stable and good protection against real overloads and short circuits is maintained.<\/p>\nHigh short-circuit resistance<\/h3>\n
Easy installation and compact design<\/h3>\n
\nTherefore, it provides a quick diagnosis and is very easy to maintain.<\/p>\nMaxge Alpha+ 2P, 20A, C-curve, 6kA - EPB63ME2C20 - Operation and Applications<\/h2>\n
\n
Main advantages of Maxge Alpha+ 2P, 20A<\/h2>\n