The Maxge Alpha+ 4P, 50A circuit breaker is a magneto-thermal circuit breaker designed for the comprehensive protection of three-phase electrical installations with neutral (3 phases + neutral) against overloads and short-circuits.
\nIt is a robust, reliable, versatile and resistant switch that guarantees effective and safe protection.<\/p>\n
With a rated current of 50 A, tripping curve C and a breaking capacity of 10 kA, this circuit-breaker is aimed at applications where a high level of safety is required. It also provides reliable fault response and stable operation in distribution switchboards.
\nIt is widely used both in homes with high demand and in commercial or industrial installations.<\/p>\n
In addition, it combines thermal and magnetic protection in a single device, making it possible to cut off the supply when something goes wrong and prevent damage to the installation, connected equipment or even greater risks.<\/p>\n
This circuit breaker is made of 4-pole (4P)<\/strong>. It therefore simultaneously protects all three phases and the neutral conductor.<\/p>\n This configuration is essential in three-phase electrical panels, as it ensures total isolation of the circuit when the device is activated, preventing residual voltages from remaining in any of the conductors. The 4P format is widely used in main switchboards, distribution boards, three-phase machinery with neutral, air-conditioning systems, pumps, fans, small and medium-sized motors. It is also used in circuits where a uniform and simultaneous cut-off of all poles is required.<\/p>\n In industrial, tertiary applications or in certain distribution configurations, the 4P cut-off provides increased safety during maintenance work. In short: more safety and fewer scares when work has to be carried out on the switchboard or when a fault occurs.<\/p>\n With a 50 ampere rated current<\/strong>, This circuit breaker is designed for circuits with high consumption, such as main lines. This capacity makes it suitable for powering equipment with higher power consumption, or several receivers operating simultaneously. In addition, its operating voltage up to 415\/240 V AC<\/strong> The new system is suitable for use in most standard or common three-phase installations.<\/p>\n The cutting power of<\/strong> this circuit breaker is made of 10 kA (10,000 amps)<\/strong>. It is capable of breaking strong short circuits without damage or compromising the integrity of the electrical system.<\/p>\n This level of protection means that the circuit breaker responds even in difficult situations and prevents serious damage to the installation, especially in switchboards close to transformers, installations with a lot of available power and networks with low line impedance.<\/p>\n This high cutting power provides extra safety and reliability, making the Maxge Alpha+ a highly recommended option in demanding environments.<\/p>\n The Maxge Alpha+ 4P, 50A circuit-breaker incorporates a firing curve C<\/strong>. It is designed to tolerate moderate current peaks without causing untimely tripping.<\/p>\n The C-curve provides an optimum balance between sensitivity and stability, maintaining effective protection against dangerous overcurrents without affecting the normal operation of the installation.<\/p>\n This reduces nuisance shots. It is therefore suitable for circuits with general and mixed loads, small to medium-sized motors, starters, transformers, ventilation, pumps, air conditioning, electronic equipment and power supplies, lighting and three-phase sockets, and equipment that may have start-up peaks (without being extreme).<\/p>\n In terms of installation, it is designed to DIN rail mounting<\/strong>. Your terminals<\/strong> are prepared to accept conductors of suitable cross-section for this current rating (25 mm\u00b2 in flexible cable and 35 mm\u00b2 in rigid cable)<\/strong>. This ensures firm and secure connections that reduce the risk of false contacts or overheating.<\/p>\n The design of this circuit-breaker stands out due to its robust construction and its compact dimensions<\/strong> (72 mm wide)<\/strong>.<\/p>\n It offers convenient operation by means of window for circuit marker<\/strong> and a visual status signalling (on\/off), <\/strong>facilitating the identification of the circuit it protects. This circuit breaker acts as a fundamental protection element in electrical distribution because it combines thermal and magnetic protection in a single mechanism:<\/p>\n It is ideal for use in main or secondary switchboards in industrial, commercial or residential buildings with demanding loads. It thus provides robust and effective protection.<\/p>\n Its 4-pole design covers both three-phase supply and neutral conductor protection, which is crucial for balanced systems or with single-phase loads connected in combination.<\/p>\n The advantages of this circuit breaker are as follows:<\/p>\n
\nThis increases personal safety, protects the installation and reduces risks during maintenance or intervention.<\/p>\n
\nIt also allows the complete isolation of the circuit and better control and isolation in three-phase installations with neutral.<\/p>\nAdequate capacity for demanding loads<\/h3>\n
\nIt is also suitable for circuits that move several pieces of equipment at the same time or shunts where significant and continuous loads are handled.<\/p>\n
\nHowever, the installation must be correctly dimensioned in terms of conductor cross-section, earth leakage protection and the rest of the switchboard elements.<\/p>\nHigh short-circuit resistance<\/h3>\n
Sensitivity and tolerance to peak loads<\/h3>\n
\nIn addition, the installation is more stable and good protection against real overloads and short circuits is maintained.<\/p>\nInstallation and design<\/h3>\n
\nThis makes it easy to integrate into standard switchboards. In addition, it allows a quick, tidy and professional installation.<\/p>\n
\nIt also provides rapid diagnosis and maintenance.<\/p>\nMaxge Alpha+ 4P, 50A, C-curve, 10kA - EPB63H4C50 - Operation and Applications<\/h2>\n
\n
Main advantages of Maxge Alpha+ 4P, 50A<\/h2>\n
\n
Technical information about Maxge Alpha+ 4P, 50A, C-curve 10kA - EPB63H4C50<\/h2>\n