The main output has a \"no-break\" function. The Victron Multiplus Compact Inverter 12V 2000VA 80-30A takes over the supply to the connected loads in the event of a blackout or mains\/generator disconnection. This happens so quickly (less than 20 milliseconds) that computers and other electronic equipment continue to operate without interruption.
\nThe second output is only active when one of the MultiPlus inputs has AC power. Devices that should not discharge the battery, such as a water heater for example, can be connected to this output (second output available on models with a rated capacity of 3kVA or more).<\/p>\n
Up to 6 Multis such as the Victron Multiplus Compact 12V 12V 2000VA 80-30A Inverter can be run in parallel to achieve a higher power output. Six 24\/5000\/120 units, for example, will give an output power of 25 kW\/30 kVA and a load capacity of 720 amps.<\/p>\n
In addition to parallel connection, three units of the same model can be configured for a three-phase output.
\nBut that's not all: up to 6 sets of three units can be connected in parallel, providing an output power of 75 kW \/ 90 kVA and over 2000 amps of load capacity.<\/p>\n
The Victron Multiplus Compact Inverter 12V 12V 2000VA 80-30A is a very powerful battery charger. Therefore, it will use a lot of current from the generator or the mains (almost 10A per 5kVA Multi at 230 VAC). A maximum current from the generator can be set on the Multi Control Panel.<\/p>\n
The MultiPlus will take over other AC loads and use the excess current for charging, thus avoiding overloading the generator or shore power.<\/p>\n
This function takes the PowerControl principle to another dimension. It allows the Victron Multiplus Compact Inverter 12V 2000VA 80-30A to supplement the capacity of the alternative source.<\/p>\n
When a power peak is required for a short period of time, as is often the case, the MultiPlus will immediately compensate the possible lack of power from the mains current or generator with power from the battery. When the load is reduced, the excess power is used to recharge the battery.<\/p>\n
The MultiPlus can be used in PV systems, whether grid-connected or off-grid, and in other alternative electrical systems.<\/p>\n
Several options are available: Battery Monitor, Multi Control Panel, Color Control GX and other devices, smartphone or tablet (Bluetooth Smart), laptop or computer (USB or RS232).<\/p>\n
Colour Control GX and other devices. Data can be accessed and system settings can be changed with a Color Control GX and other devices if connected to Ethernet.<\/p>\n View Victron Multiplus Compact Inverter 12V 2000VA 80-30A data sheet - CMP122200000<\/a><\/p>\n
\nData can be stored and displayed free of charge on the web. VRM<\/a> (Victron Remote Management).<\/p>\nRemote configuration<\/h3>\n
Technical specifications and manual Victron Multiplus Compact 12V 2000VA 80-30A inverter \u2013 CMP122200000<\/h2>\n