- \n
- The SmartSolar MPPT RS is a 48 V solar charge controller with a PV input of up to 450 VDC PV and a 100 A or 200 A output.<\/li>\n
- It is used in off-grid and grid-connected solar applications where maximum battery charging power is required.<\/li>\n<\/ul>\n
Multiple independent MPPT monitoring inputs<\/h2>\n
- \n
- With various MPPT trackers, you can optimise the design of your solar panels for maximum performance at a specific location.<\/li>\n<\/ul>\n
Isolated PV connections for more safety in the Victron MPPT RS SmartSolar Controller<\/h2>\n
- \n
- Complete galvanic isolation between the battery and PV connections provides additional safety for the entire system.<\/li>\n<\/ul>\n
Wide MPPT voltage range of the Victron SmartSolar MPPT RS 450\/200-MC4 MPPT Controller<\/h2>\n
- \n
- Operating range from 80 to 450 VDC PV with a starting voltage of 120 VDC PV.<\/li>\n<\/ul>\n
Lightweight, efficient and quiet<\/h2>\n
- \n
- Thanks to its high-frequency technology and new design, the 100 A model of this powerful charger weighs only 7.9 kg.<\/li>\n
- In addition, it has excellent efficiency, low standby power consumption and very quiet operation.<\/li>\n<\/ul>\n
Display and Bluetooth<\/h2>\n
- \n
- The display shows battery and controller parameters.<\/li>\n
- These parameters can be accessed with a smartphone or other Bluetooth enabled device.<\/li>\n
- In addition, Bluetooth can be used to configure the system and change parameters with VictronConnect.<\/li>\n<\/ul>\n
Monitoring of the PV insulation resistance for peace of mind at higher voltages<\/h2>\n
- \n
- The MPPT RS continuously monitors the PV array and can detect faults that reduce the insulation of the panels to unsafe levels.<\/li>\n<\/ul>\n
VE.Can and VE.Direct port<\/h2>\n
- \n
- Allows you to connect it to the Victron Cerbo GX MK2 Monitoring - BPP900451100<\/a>\u00a0for remote system monitoring, data logging and firmware upgrades.<\/li>\n
- VE.Can allows up to 25 units to be connected together in parallel and synchronise their charging processes.<\/li>\n<\/ul>\n
I\/O connections<\/h2>\n
- \n
- Programmable relay, temperature sensor, auxiliary, digital input and voltage sensor connections. Remote input can accept Victron smallBMS and other types of BMS with \"Load Enable\" signal.<\/li>\n<\/ul>\n
![\"MPPT](\"https:\/\/fvcomponentes.com\/wp-content\/uploads\/2023\/03\/Captura-9.png\" "\\"\\"")
<\/p>\nDatasheet Victron SmartSolar MPPT RS 450\/200-MC4 Regulator - SCC145120510<\/h2>\n
- VE.Can allows up to 25 units to be connected together in parallel and synchronise their charging processes.<\/li>\n<\/ul>\n
- Allows you to connect it to the Victron Cerbo GX MK2 Monitoring - BPP900451100<\/a>\u00a0for remote system monitoring, data logging and firmware upgrades.<\/li>\n
- The MPPT RS continuously monitors the PV array and can detect faults that reduce the insulation of the panels to unsafe levels.<\/li>\n<\/ul>\n
- Operating range from 80 to 450 VDC PV with a starting voltage of 120 VDC PV.<\/li>\n<\/ul>\n
- Complete galvanic isolation between the battery and PV connections provides additional safety for the entire system.<\/li>\n<\/ul>\n
- With various MPPT trackers, you can optimise the design of your solar panels for maximum performance at a specific location.<\/li>\n<\/ul>\n