{"id":15337,"date":"2024-06-21T10:23:10","date_gmt":"2024-06-21T08:23:10","guid":{"rendered":"https:\/\/fvcomponentes.com\/?post_type=product&p=15337"},"modified":"2026-04-08T21:36:13","modified_gmt":"2026-04-08T19:36:13","slug":"charger-victron-skylla-tg-24-30-11-120-240v-sdtg2400301-7","status":"publish","type":"product","link":"https:\/\/fvcomponentes.com\/en\/producto\/cargador-24v-victron-phoenix-24-25-21-120-240v-pch024025001\/","title":{"rendered":"Charger 24V Victron Phoenix 24\/25 (2+1) 120\/240V - PCH024025001"},"content":{"rendered":"

Features of the 24V Charger Victron Phoenix 24\/25 (2+1) 120\/240V - PCH024025001<\/h2>\n

4-stage variable loading system: bulk - absorption - float - storage<\/h2>\n

The Victron Phoenix 24V 24\/25 (2+1) 120\/240V - PCH024025001 24V charger features a microprocessor controlled \"variable\" battery management system that can be configured for different battery types. Its \"variable\" function will automatically optimise the process based on the usage of the battery.<\/p>\n

The right amount of load: variable absorption time<\/h2>\n

When the discharge is low (e.g. a yacht connected to the pontoon mains) the absorption charging phase is shortened to avoid overcharging the battery. After a deep discharge, the absorption charge time is automatically increased to ensure that the battery is fully recharged.<\/p>\n

Preventing damage due to over-gassing: BatterySafe mode (see fig. 2 below)<\/h2>\n

If, in order to charge a battery quickly, a combination of high charging current and high absorption voltage has been chosen, the Victron Phoenix 24V 24\/25 (2+1) 120\/240V - PCH024025001 charger will prevent damage from over gassing by automatically limiting the rate of voltage increase once the gassing voltage has been reached (see the charging curve between 14.4 V and 15.0 V in fig. 2 below).<\/p>\n

Reduced ageing and maintenance when the battery is not in use: Storage Mode
\n(see fig. 1 and 2 below).<\/h2>\n

The storage mode is activated when the battery has not been discharged for 24 hours. In storage mode, the float voltage is reduced to 2.2 V\/cell (13.2 V for 12 V batteries) to reduce gassing and corrosion of the positive plates. Once a week, the voltage is brought back up to absorption level to \"equalise\" the battery. This function prevents electrolyte stratification and sulphation, the main causes of battery failure.<\/p>\n

For a longer battery life: temperature compensation<\/h2>\n

All chargers come with a battery temperature sensor. When connected, the charging voltage will automatically decrease as the battery temperature increases. This function is especially recommended for sealed batteries and\/or when large temperature fluctuations are expected in the battery.<\/p>\n

Victron Phoenix 24\/25 (2+1) 120\/240V 24V battery charger voltage sensor - PCH024025001<\/h2>\n

To compensate for voltage losses due to cable resistance, the chargers have a voltage probe function so that the battery always receives the correct charging voltage.<\/p>\n

Universal input voltage range: 90-265 VAC and also suitable for DC supply
\n(AC-DC and DC-DC operation)<\/h2>\n

The chargers shall accept a 90-400 VDC supply.<\/p>\n

Computer interface<\/h2>\n

All chargers are ready to communicate with a computer via their RS-485 data port. In conjunction with our VEConfigure software and the Victron MK2-USB Link Interface for Phoenix Charger - ASS030130010<\/a>In addition, all the parameters of the chargers can be customised.<\/p>\n

Load curves: up to gassing voltage (fig.1), and exceeding the gassing voltage (fig.2)<\/strong>
\n<\/span><\/p>\n

\"Image<\/p>\n

Datasheet 24V Charger Victron Phoenix 24\/25 (2+1) 120\/240V - PCH024025001<\/span><\/h2>\n

See Victron Phoenix 24V 24\/25 (2+1) 120\/240V charger data sheet - PCH024025001<\/a><\/span><\/p>","protected":false},"excerpt":{"rendered":"