Inverter Victron Phoenix 48/800 VE Direct NEMA GFCI (UL 458) 120V - PIN481800510

Features Inverter Victron Phoenix 48/800 VE Direct NEMA GFCI (UL 458) 120V - PIN481800510

The Victron VE.Direct communications port allows the PV inverter to be connected to the

• A computer (a VE.Direct to USB interface cable is required).
• Apple and Android smartphones, tablets, mackbooks and other devices (a VE.Direct to Bluetooth Smart dongle is required).

The Victron Phoenix 48/800 VE Direct NEMA GFCI (UL 458) 120V Inverter - PIN481800510 is fully configurable:

• Low battery voltage alarm and reconnection levels.
• Low battery voltage shutdown and restart levels.
• Dynamic disconnection: load-dependent disconnection level
• Frequency 50 Hz or 60 Hz
• ECO mode on/off and ECO mode level sensor

ECO mode operation

The Victron Phoenix 48/800 VE Direct NEMA GFCI (UL 458) 120V Inverter - PIN481800510 will stand-by when the output wattage drops below a pre-set value. Once in stand-by, the inverter will activate briefly (adjustable; default: every 2.5 seconds). If the load exceeds the preset level, the inverter will remain on.

Additional high peak starting power of the Victron Phoenix 48/800 VE Direct Inverter NEMA GFCI (UL 458) 120V - PIN481800510

One of the features of SinusMax technology is its very high starting power. Phoenix inverters are suitable for powering difficult loads, such as motors or power tools with a high starting peak.

Remote on/off switch

On this model of solar inverter, you can connect a remote On/Off switch and run the two wires to the inverter to remotely turn the inverter on and off. This option is one of the most valued by customers with a caravan or a boat or sailboat.

Datasheet Victron Phoenix Inverter 48/800 VE Direct NEMA GFCI (UL 458) 120V - PIN481800510

View Victron Phoenix 48/800 VE Direct NEMA GFCI (UL 458) 120V Inverter data sheet - PIN481800510