You must be logged in to post a review.
- Free shipping to mainland Spain for orders over 300€.
1.108,26€ VAT inc.
Up to six Multiplus 12V 3000VA 120-50A can be operated in parallel to achieve higher power output. In addition to parallel connection, three units can be configured for three-phase output by assigning each inverter to one of the three phases.
In the event of a power failure, or disconnection of the shore power or generator, the integrated inverter in the Victron Multiplus 12V Inverter 12V 3000VA 120-50A 120V (UL 1741 and 458) - PMP122301102 automatically activates and takes over the supply to power the connected loads. This happens so quickly (less than 20 milliseconds) that computers and other electronic equipment continue to operate without interruption.
If connected with a GX device, such as the Victron Cerbo GX Monitoring - BPP900450100The Victron Multiplus Inverter and your system(s) can be monitored and controlled locally (LAN) or remotely over the internet from anywhere in the world with the free VRM app and the free portal VRM. Access can be carried out from a phone, tablet or PC with different operating systems.
The level of control is limitless, from the setting of the Victron Multiplus Inverter 12V 3000VA 120-50A to the automatic start of a standby generator. And much more...
The full-bridge plus toroidal transformer topology has proven its reliability over many years. The inverter is short-circuit proof and protected against overheating, whether due to overload or high ambient temperature.
A maximum current from the generator or pontoon can be set on the Multi Control Panel. The Victron Multiplus 12V Inverter 12V 3000VA 120-50A 120V (UL 1741 and 458) - PMP122301102 will take over other AC loads and use the excess current for charging, thus avoiding overloading the generator or the shore power.
When a power peak is required for a short period of time, as is often the case, the inverter will immediately compensate for the possible lack of power from the grid current or generator with power from the battery. When the load is reduced, the excess power is used to recharge the battery.
The main output provides a powerful charge to the battery system via advanced "variable charge" software. The software fine-tunes the automatic three-stage process to match battery conditions and adds a fourth stage for extended periods of float.
In addition, the MultiPlus can charge a second battery using a separate limited charge output designed to charge a starter battery from the main engine or generator.
Necessary for starting loads with high inrush current, such as converters for LED lamps, halogen lamps or power tools.
When the search mode is activated, the consumption of the inverter in no-load operation decreases by approximately 70%. In this mode the Victron Multiplus 12V Inverter 12V 3000VA 120-50A 120V (UL 1741 and 458) - PMP122301102, when operating in inverter mode, switches off if there is no load or very little load, and switches back on every two seconds for a short period of time.
If the output current exceeds a preset level, the inverter shall continue to operate. Otherwise, the inverter will shut down again.
The programmable relay is by default configured as alarm relay, i.e. the relay will be de-energised in case of alarm or pre-alarm (inverter is too hot, input ripple is almost too high and battery voltage is too low).
Enter our blog and download the PDF diagram for wiring and connecting your Victron Multiplus inverter in a camper van. You can find the diagram and much more technical information in our new blog section.
Click to download our schematic Victron Multiplus of our blog.
Weight | 18 kg |
---|---|
Dimensions | 37 × 26 × 22 cm |
You must be logged in to post a review.
Online shop specialising in Victron Energy with the best prices on solar panels and lithium batteries.
Official Fronius and Victron Energy technical service.
Do you need assembly? Installation of solar panels
At FVComponents.com we have stock of the references with the highest turnover, however our catalogue is so wide and economical because we work with many of the references on request. This means that the usual delivery time of 2-4 working days can be extended to 1-2 weeks + subsequent shipment by us. Thanks to this, we can offer very competitive and attractive prices to our customers that are difficult to match. If you wish, you can write to us via the chat on the website, call us at 968 97 83 01 or write to us at [email protected] to check if we have stock or the delivery time of the component you wish to purchase before finalising your order.
Reviews
There are no reviews yet.